Workshop manual. English. XP. For Husqvarna Parts Call or Workshop manual. 90 , , XP, For Husqvarna Parts Call or XP, XPG, Xp E-tech, XPG E-tech, , G, E-tech, G E- tech, TrioBrake. Please read the operator’s manual carefully and make sure.
|Published (Last):||3 January 2013|
|PDF File Size:||3.94 Mb|
|ePub File Size:||2.93 Mb|
|Price:||Free* [*Free Regsitration Required]|
Check the throttle trigger for smooth operation. To maintain cutting performance you must file back the raker teeth to the recommended height.
Assembly Mounting guide bar and chain Always wear gloves, when working with the chain, in order to protect your hands from injury. If you have spilt fuel or chain oil on the saw. Hsqvarna blocked mesh will cause the engine manuap overheat and may lead to mnual Before moving your chain saw switch off the engine and lock the chain using the chain brake.
C Clearing the trunk and preparing your retreat Remove any branches that are in the way. Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk. Tree Felling Technique 2 The log is supported at one end.
Always use special chain oil with good adhesive characteristics. Page 22 C Clearing the trunk and preparing your retreat Remove any branches that are in the way. The following engine speed applies: Spark plug The spark plug condition is influenced by: Husqvarna Workshop Manual 52 pages.
Husqvarna 346XP E-tech User Manual
Aim the tip of the saw at a light coloured surface about 20 cm away. There is a high risk that it will split. Page of 36 Go. Table Of Contents Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.
If any binding occurs, or if engine fails to return to idle, the saw should be taken to your dealer, before it is used again. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen.
Comments to this Manuals Your Name. Wipe off the spill husqvaarna allow remaining fuel to evaporate. Chainsaw Husqvarna Operator’s Manual Husqvarna chainsaw operator’s manual 44 pages.
Husqvarna FAQ : Documentation – Operators and Illustrated Parts Manual or XP series Chainsaw
Daily Maintenance Below you will find some general maintenance instructions. Page 11 1 Cutting equipment designed to minimise kickback Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback.
When you use a chain saw vibrations are generated by the uneven contact between the chain and the wood you are cutting. Press the throttle lock and make sure it returns to its original position when you release it.
Husqvarna Workshop Manual 50 pages. B Finish by cutting from above so that the two cuts meet.
Check that the throttle control and throttle lock move freely and that the return springs work If you have more questions, contact your servicing dealer. Turning the screw clockwise will reduce Remove these with a file if necessary. You must use approved personal protective equipment whenever you use mahual machine.
Fit a guard to the bar before carrying the saw any distance. Don’t have an account? Never carry or hang the saw by the trigger. General rules If you understand what kickback is and how it happens then you can reduce or eliminate the element of surprise. Chain saws can be dangerous! General Rules General rules If you understand what kickback is and how it happens mwnual you can reduce or eliminate the element of surprise. Below you will find some general maintenance instructions.
If the muffler on your saw is fitted with a spark arrestor mesh this must be cleaned regularly. Mounting guide bar and chain Always wear gloves, when working with the chain, in order to protect your hands from injury.
HUSQVARNA XP OPERATOR’S MANUAL Pdf Download.
Please read the instructions carefully and make sure you understand them before using the saw. When you buy any of our products we guarantee the availability of professional repairs and service.
A damaged air filter must always be replaced. Enter text from picture: Stop Switch 5 Vibration damping system Your chain saw is equipped with a vibration damping system that is designed to minimise vibrations and make operation easier. Don’t show me this message again. Page 12 2 Sharpening your chain and adjusting raker clearance The risk of kickback is increased with a badly sharpened chain! Chain Catcher The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes.
The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes. Kickback is usually quite mild, but it can sometimes be very sudden and violent. To do this it is best to work from the top down and keep the trunk between you and the chain saw.
Maintenance First adjust the L-jet, then the idling screw T and then the H-jet.
To print the manual completely, please, download it.